Tips From the Moving Business Pros: How to Move a Pinball Device
With pinball making a huge revival throughout the nation, Gentle Giant wishes to make certain that these timeless, gorgeous devices remain damage-free while being carried. Oh, and we want the people moving them to be safe, too.
At very first look, pinball machines can appear daunting to move since of their fragility, weight, and size. Fortunately, our competent Giants have a couple of techniques up their sleeves to ensure your pinball is moved with ease.
Folding Down the Headbox
The bulk of modern-day pinballs (made in the last Twenty Years or two) have a hinge system which permits the headbox to be folded down. Early pinball makers had their headboxes bolted on, using either two or four bolts. All Electro-Mechanical pinballs utilize this system, in addition to the early Strong State machines.
Later devices have hinges and utilize a locking system to keep the headbox upright. There might also be two bolts inside as added security, in case the lock is broken or mistakenly un-latched.
For Electro-Mechanical pinball machines, you have to eliminate the headbox rear gain access to panel to get to the bolts and plugs within. Generally this panel has a lock on it to keep it in place, but in time the secret might have been lost. Frequently, there is a screw keeping this panel in place.
Once inside, eliminate the bolts and disconnect the big adapters that have circuitry going down into the machine. You may want to identify these adapters to put them back in the ideal area, but they should be different sizes, making it challenging to plug back incorrectly.
You can now eliminate the headbox entirely, or fold the headbox down onto the playfield glass. Make certain you utilize some foam, heavy cardboard, or blankets to protect the headbox from rubbing on the cabinet. Foam is best, as it will help keep the back glass in place.
Early Solid State Pinballs
For early Solid State Pinballs, you will need to eliminate the back glass. There is a lock situated on the headbox in among 3 areas: the left-hand side at the top, right-hand side at the top or on top of the headbox in the center.
When opened, eliminate the back glass by raising it up utilizing the lift channel (at the bottom of the glass), then pull it out from the bottom.
Open up the back box lamp panel by lifting the latch located on either the left-hand side or right-hand side. The panel can now swing out towards you, and provide you access to the circuit boards, plugs, and the bolts. Some Gottlieb pinballs need you to raise the light panel in order to swing it open.
Now that you are within, you can get rid of the bolts, and any plugs that have wires decreasing into the maker. You might wish to identify these plugs to put them back in the ideal area. You may not need to remove the plugs, as the wiring should be long enough to allow the headbox to be folded down.
At this point, you can lock up the lamp panel and replace the back glass.
Modern Solid State Pinballs
For Data East, Sega, and Stern Modern pinballs, there is a turnable latch system located at the back of the headbox. Using the supplied key, turn the latch 90 ° counter-clockwise.
For Williams, Bally, and Gottlieb, you can easily unlatch the back box at the back of the device. This is an easy setup and needs no tools.
You're done if you can now fold down the head box onto the cabinet. Make certain you utilize some foam, heavy cardboard, or blankets to secure the headbox from rubbing on the cabinet. Foam is best, as it will likewise assist keep the back glass in location.
If you can not fold the head box down, then you require to enter. There is a lock situated at the top of the back glass in the. Utilize the provided secret to unlock, and get rid of the back glass by raising it up from the bottom, and after that pulling it out from the bottom.
Next, you will require to get rid of the display screen panel. You can do this by raising it up and out. And lastly, open the light panel. There will be a lock situated on either the left-hand or right-hand side. (Some newer Williams and Bally pinballs do not have a separate amp panel, it belongs to the back glass panel. And later Sega and Stern pinballs use a fluorescent tube for the back glass lighting).
Remove the 2 bolts, put the back box back together, and fold down the head box onto the cabinet. Make certain you utilize some foam, heavy cardboard, or blankets to secure the headbox from rubbing on the cabinet. Foam is best, as it will likewise assist keep the back glass in location.
Eliminating the Legs.
Pinball Device legs are held in place by eight bolts. They will be either 5/8 inch or 9/16 inch heads. The modern pinballs have captive nuts or threaded plates inside for the bolts to screw into. These bolts can be removed, and the legs will come off.
These captive nuts and threaded plates can be damaged, and the use of additional nuts might have been needed. If this holds true, you will have to open up the front door of the pinball, slide out the playfield glass, and lift up the playfield.
With the front door (coin door) open, move the lock down read more bar latch across and remove the lock down bar. Then move out the playfield glass, and put in a safe location. Next, raise the playfield by putting your hand where the ball drains, and lift the playfield up.
You should now have access to any nuts that might have been utilized. As soon as any nuts have actually been eliminated, replace the playfield glass and lock down bar, and lock the front door.
Be sure to mark or remember which legs are for the front and back, as they will be changed in a different way to match.
Packing the Pinball.
You are now prepared to transfer your pinball machine. Before you fill it, make certain you get rid of the pinballs so they do not bounce around during transport.
If you are moving the pinball using a van or SUV, it might be much easier to eliminate the legs just prior to loading the maker. Get a pal to have and help one of you supporting the pinball, while the other gets rid of the front legs.
Make certain you strap the pinball in, as you do not desire it moving if you have to stop suddenly!
For Electro-Mechanical pinball makers, you require to eliminate the headbox rear access panel to get access to the bolts and plugs within. (Some newer Williams and Bally pinballs do not have a separate amp panel, it is part of the back glass panel. And later on Sega and Stern pinballs utilize a fluorescent tube for the back glass lighting).
If you are moving the pinball using a van or SUV, it may be much easier to get rid of the legs simply prior to loading the machine. Get a pal to help and have one of you supporting the pinball, while the other gets rid of the front legs.